Description
Products Description
Fish feed extruder is one of the indispensable equipment in fishery production. It can extrude fish feed to improve its nutritional value and taste. Below, we will introduce the operation process of fish feed extruder in detail.
Before operating the fish feed extruder, you need to make adequate preparations. First, check whether the equipment is intact and whether the components are tightly connected. Secondly, select the appropriate extrusion mold according to production needs, and clean and disinfect it. Finally, prepare the required fish feed and other auxiliary materials to ensure that their quality meets production requirements.
Product Parameters
| Model | 100 | 120 | 135 |
| Power | 37KW | 55KW | 75KW |
| Yield | 700-1000 | 1200-1500 | 1500-1800 |
| Weight | 750KG | 850KG | 950KG |
| Size(mm) | 1970*2900*1150 | 2200*2900*1200 | 2350*2900*1200 |
1. After turning on the power, start the fish feed extruder according to the requirements of the equipment manual. Pay attention to the operation of the equipment to ensure that there is no abnormal sound and vibration.
2. Adjust the temperature and pressure parameters of the equipment according to production needs. Generally speaking, the temperature should be controlled within an appropriate range to ensure that the fish feed can be fully extruded and will not deteriorate due to excessive temperature.
3. Before formal extrusion, a trial run can be carried out to check whether the equipment is stable and whether the extrusion effect meets expectations.
1. Evenly feed the prepared fish feed into the feed port of the extruder, and pay attention to controlling the feeding speed to avoid too fast or too slow feeding, which will lead to poor extrusion effect.
2. During the extrusion process, closely observe the operating status and extrusion effect of the equipment. If any abnormality is found, the machine should be stopped immediately for inspection and troubleshooting.
3. According to production needs, the temperature and pressure parameters of the equipment can be adjusted in time to obtain the best extrusion effect.
4. After the extrusion is completed, shut down the equipment and cut off the power supply in time to ensure production safety.
Qualifications and Honors
Customer visit
Hot Tags: fish food automatic extruder, China fish food automatic extruder manufacturers, suppliers, factory, floating food extruder machine, shrimp food pellet mill, fish feed pelletizer, cold feed extruder, floating fish food mill, dry type fish feed extruder
Send Inquiry
You Might Also Like
