High Efficiency Feed Automatic Extruder

Feed extruder can fully automatically extrude feed.

Send Inquiry

Description

Products Description

The role of the extruder in the production process of feed is getting bigger and bigger. It can produce a variety of feeds and is an indispensable helper for friends engaged in feed production. For friends who are just starting to produce feed, it is difficult to operate and use the extruder. Let's take a look at the use and function of the feed extruder.

Product Parameters

Model	Power	Feeder	Cutter
DGP40	4KW	0.4KW	0.4KW
DGP50	11KW	0.4KW	0.4KW
DGP60	15KW	0.4KW	0.4KW
DGP70	18.5KW	0.4KW	0.4KW

The pellet extruder is suitable for fish, shrimp, frogs, pigs, ducks, etc. The extruded feed produced by the extruder has the characteristics of soft and ripe extrusion, high protein, complete nutritional ingredients, long-term floating on the water surface, and no waste of feed. Add trace elements to promote the rapid growth of fish.
Add wheat bran, corn flour, bean dregs, fish meal, etc., plus compound premixes, add 10-17 catties of clean water per catty according to the formula, put it into the mixer and stir evenly for about 3-5 minutes, start the mixer auger, pump the material into the storage barrel, and the storage barrel auger pumps it into the extruder port. Pay attention to controlling the closing gate of the storage barrel. From small to large.

Pelletizing part: The pelletizing size is determined by the discharge hole. If you want to expand, it is generally 4.5 cm, and 4-5 holes are opened. If you want high output, you can open 10-15 holes without expansion. The small motor can be adjusted forward and backward, and the knife should be forward. When feeding, it is better to start with 3-5 catties of feed and add more water.
After each feeding, disassemble the front cutting part, use a tool hook to immediately disassemble the nut on the extruder head, then start the motor to let the excess feed in the machine flow out, and clean the nut hole plate.