Cow Feed Pellet Making Machine

We all know that feed pellet mill is composed of feeding hopper + discharge hopper + pellet pressing room + motor + transmission box, gearbox + pressure roller and mold. Easy to install errors are in the pressure roller and motor above, there is a very important point, feed pellet mill in the use of the process has always been to comply with the principle of dry in dry out, if you add water, moisture can not be more than 13% or more, otherwise the damage to the motor is very serious. After we have successfully installed, the first time we use it, we must first add oil to prevent the machine from wear and tear. In fact, for making feed, the trial machine and installation is very necessary, but if you really need to pelletize what degree of finished feed, depending on which machine you use.

Feed making machine for poultry

1,Open the packing box .
2, Remove the plastic protective film
3,Spare parts
4,Please add lubricating oil before executing each operation.
5, to add lubricant to the pressure roller, the top of the grease gun to the injection hole and press the lever 5-6 times, a total of 4 ml of lubricant, each side of an injection hole.
6,When adding lubricant to the main shaft, align the top of the grease gun with the grease hole and press the grease lever 5-6 times, injecting 4ml of lubricant in total.
7,Fix the wheel, put the cotter pin through the hole on the axle, and bend the lower end separately to both sides to fix it on the axle.
8,Fill the gear box with lubricating oil.
9,Pull out the oil marker and add standard hyperbolic gear oil.
10,The first time you add gear oil, the oil level should reach the marked position.
11,Replace the gear oil every six months.

Feed pellet machine 

There are a lot of customers inspecting the pellet machine, the most common question is: "How much does your pellet machine cost?" In fact, it is not quite correct to ask this. There are many factors that affect the price of biomass pellet mill.
1, the pellet machine model
2, the demand for production
3, the quality of the pellet machine
I hope to be engaged in the production of biomass pellet fuel customers and friends, in the inspection of the equipment, do not take the price as the first, the main thing is to buy back to the equipment can give us a job, to realize the value. Even if it is more expensive, it is still worth buying.

Hot Tags: cow feed pellet making machine, China cow feed pellet making machine manufacturers, suppliers, factory, food pellet granulator, cattle food pellet machine, Mini Food Pellet Machine, goat feed making machine, cattle feed production machine, pellet machine for feed