Description
Products Description
The pellet mill in a feed mill is one of the important equipment for animal feed processing, and its bearings are an indispensable part of the machine's operation. When the bearings are aged or damaged, they need to be replaced in time to ensure the normal operation of the machine. This article will introduce the detailed steps and precautions for replacing the bearings of the pellet mill in a feed mill.
Disassembling the machine
1. Turn off the power and cut off the wires first, and confirm that the machine has stopped.
2. Use tools to disassemble the outer shell and head of the pellet mill in the feed mill.
3. Remove the internal parts of the pellet mill in the feed mill, including the pelletizing disc and template.
Product Parameters
| Model | Main Power | Capacity(kg) | Size(cm) |
| 125 | 4KW | 60-80 | 105*34*61 |
| 150 | 4KW | 100-120 | 105*34*61 |
| 160 | 4.5KW | 120-150 | 105*34*61 |
| 210 | 7.5KW | 150-300 | 120*44*76 |
Cleaning parts
1. Clean the loose powder and straw inside the machine.
2. Clean the parts such as the granulating disc and template, and use a clean gauze or brush to remove surface dirt and dust.
3. After cleaning, dry the parts.
Check the bearings
1. Make sure the removed bearings are of the correct model.
2. Take out the bearings and touch them to see if they are overheated. Also check if there are any problems such as wear or cracks inside the bearings.
3. Check whether the lubricating oil inside the bearings meets the requirements. If the oil quality is deteriorated, it should be replaced in time.
Replace the bearing
1. Prepare the new bearing and make sure it is the same model as the original bearing.
2. Install the new bearing on the shaft, tighten it by hand first and then tighten the screw with a torque wrench to confirm whether it is properly tightened.
3. After replacing the bearing, reinstall the internal parts of the machine, including the pelletizing disc and template.
4. Reinstall the machine housing and pelletizer head.
Precautions
1. When replacing the bearing, be sure to use the same model of bearing and ensure that the tightening force is appropriate.
2. When replacing the bearing, it is necessary to clean the internal parts of the machine and check whether the parts are damaged.
3. Before replacing the bearing, it is necessary to turn off the power and cut off the wires.
4. Be careful when replacing the bearing to avoid secondary damage. If you are not capable of operating it yourself, it is recommended to find a professional technician to replace it.
Qualifications and Honors
Customer visit
Hot Tags: hen feed making mill, China hen feed making mill manufacturers, suppliers, factory, graph feed pelletizer, introduction feed pelletizer, application feed pellet mill, collaborator feed pelletizer, animal feed pellet press, small pelleting machine
Send Inquiry
You Might Also Like
