Small And Medium-sized Feed Pellet Mill

The pellet feed produced by the feed pellet machine is of good quality and taste.

Send Inquiry

Description

Products Description

Before you start replacing the bearings, make sure you have the necessary tools and spare parts ready and that the operating environment is safe. Following these simple steps, you will be able to easily complete the bearing replacement.
During the operation of the machine, if you hear unusual noises from the bearings, this may be a sign that the bearings may be severely worn. At this time, the bearings should be disassembled and inspected immediately. If severe wear is indeed found, the bearings need to be replaced in time.

Product Parameters

Model	Capacity	Dimension	Weight
MK-125	80-100kg/h	1103570 cm	95 kg
MK-150	120-150kg/h	1153580cm	100 kg
MK-210	200-300kg/h	1154595cm	300 kg
MK-260	500-600kg/h	13846100cm	350 kg
MK-300	700-800kg/h	13053105cm	600 kg
MK-360	900-1000kg/h	16067150cm	800 kg
MK-400	1200-1500kg/h	*16068145cm*	1200 kg
1.Used for making animal feed pellets 2.Used for making wood pellets as fuel 3.Raw material size need 3-5mm ; Humidity :10-12%

1. First, the paging baffle needs to be removed to better access and operate the subsequent components.
2. Next, remove the motor shield, which will provide more space for the next operation.
3. Loosen the motor bolts and carefully remove the chain to ensure safety during operation.
4. Then, remove the active roller sprocket, which is an important step in replacing the bearings.
5. Immediately afterwards, remove the bearing seat fixing bolts to release the bearing's fixing force.

6. After that, remove the pressure wheel frame for further access and operation of the bearings.
7. Loosen the conveyor section belt and carefully remove the conveyor panel to ensure smooth operation.
8. Next, remove the active roller, which is a key step in replacing the bearing.
9. Finally, use the pull code to remove the damaged bearing and install the new bearing to complete the replacement process.