Automatic Straw Feed Pelletizing Production Line

The import and export of the straw granulator are improved, and the knife disc maintains a certain thickness to increase its rotational inertia and prevent the knife disc from fluctuating too much during the cutting process. Two wind blades are installed on the knife disc, and wind is generated during the rotation of the knife disc to blow out the cut sawdust. According to the power requirements of the engine, the production capacity of the branch crusher is determined, and the appropriate number of flying knives, cutting power and cutting force are calculated. The extension of the flying knife can be adjusted to ensure the cutting quality. The tapered roller bearing is matched with the main shaft, and the power transmission adopts belt drive.

When the straw granulator makes noise, there may be problems with the bearing, causing the machine to run abnormally. Check the bearing first. If the machine does not run properly, there will be some problems, causing noise. If noise occurs, the problem location should be checked in time and effectively solved.
Lack of lubrication. Since the gears run for a long time and are not stopped in time for lubrication, the gears rub against each other. They are iron accessories and will inevitably produce noise. We should lubricate them frequently and do a good job of maintenance, which is good for us.