Fish Food Making Production Line

Today to introduce you to the process of granulation of feed pellet machine, it is is a common agricultural machinery, mainly used to process a variety of feed ingredients into granular form. This kind of machinery has a wide range of applications in agricultural production, and can provide convenient and efficient feed supply for animal husbandry; feed pellet machine can process all kinds of feed raw materials into granular form with uniform size and shape. This kind of processing can make the feed easier to store, transport and feed, and also can improve the utilization rate of feed and the digestibility of animals.

First of all, the raw materials required for granulation of feed pellet machine include all kinds of grains, soybean meal, fish meal, etc. These raw materials need to be strictly screened and cleaned to ensure their quality and purity. At the same time, according to different formula needs, also need to add the right amount of additives and vitamins and so on.
Next is the pretreatment before granulation. This step includes operations such as crushing, mixing and tempering of raw materials. Crushing is to break the raw materials into smaller particles to facilitate the subsequent granulation process. Mixing is to evenly blend the ingredients to ensure the quality and stability of the feed. Tempering is to adjust the humidity and temperature of the raw materials to make them more suitable for pelletizing.
Then comes the pelleting process. Pelleting is the process of pressing the pre-treated raw materials into granules through a pelletizing machine. In this process, the raw materials are fed into the granulator, and after compression and friction, they gradually form granules. At the same time, the granulator also controls the size, shape and hardness of the granules by adjusting parameters such as pressure, temperature and moisture.
Finally, there is the cooling and packaging process. After granulation, the pellets undergo a cooling process to reduce their temperature and increase their stability. These granules are then fed into the packaging machine for packaging for easy transportation and use.

Fish feed pellet production line

1. Keep the machine clean for a long time; when it is shut down for a long time, there should be anti-rust and anti-dirt measures for the machine.
2. Strictly prohibit the raw materials into the gate, do not allow any metal and other impurities mixed in the material into the machine mixing and extrusion. To avoid damage to the machine clamor. Machine should be closed when not in production feed hopper, so as to avoid debris into the screw work area.
3. The main reducer and feeding device reducer should regularly check the cleanliness of the internal oil, the new machine running 50 hours to replace the lubricant once, after normal production if the lubricant is found to be seriously contaminated should be replaced.
4. When the unit is running, lubricate the transmission parts to be lubricated at the right time.
5. In case of special circumstances in the work of a long time downtime (such as power outages) should be promptly cleaned up the machine residue, in order to prevent the polymer cooling and curing is difficult to remove, affecting the next production.
6. Regularly clean up the unit of each cooling water interface scale (some water impurities, easy to accumulate scale) to avoid the blockage caused by poor cooling effect or affect the precision of temperature control.
7. The electrical control cabinet should be cleaned once a month to avoid short-circuit failure.

Fish food pellet making production line

The host adopts high-precision gear drive, ring mold quick dismantling ring ring type, the output is 20% higher than the belt drive;.
Equipped with automatic steam adjustment system to keep the refining temperature constant.
Adopting advanced heat treatment vacuum furnace to process ring die, prolonging service life, smoother particles, superior quality;.
All stainless steel, water tank, pulling knife, convenient and reliable.
The whole feed processing line is automatically controlled
1.5-12mm type pellets are equipped with a variety of ring molds with different apertures and thicknesses, users can choose the ring molds according to their needs in order to obtain better technical and economic benefits.

Hot Tags: fish food making production line, China fish food making production line manufacturers, suppliers, factory, Fish Feed Equipment, screw feed extruder machine, extruder line for floating fish feed, Fish feed extrusion machine machine, fish feed pellet making plant, Fish Extruder Machines