Do Problems Always Occur When Changing Or Mixing Animal Feed Extruders?

 

 

First, let's discuss livestock and poultry feeds, such as chicken and pig feed. These have a high proportion of main ingredients (over 70%), so when mixing, it's crucial to ensure the energy and protein components are evenly distributed. Mix cornmeal and soybean meal for 5 minutes first, then add premix and minerals. The premix must be diluted gradually to prevent poisoning from excessive consumption by chickens and pigs. If wet by-products like distiller's grains or tofu residue are added, squeeze out the water first, then mix with the dry feed in batches, adding 10% wet feed each time, mixing thoroughly before adding the next batch.

 

Next, let's discuss aquatic feeds, such as fish and shrimp feed. These require even higher fineness and uniformity of raw materials. All raw materials must be ground into a fine powder of at least 80 mesh. When mixing, first mix high-protein ingredients like fishmeal and bone meal with cornmeal, then add vegetable oil and attractants. The amount of vegetable oil should not exceed 5%, otherwise it will make the feed sticky and clog the pellet mill. Fish fry feed has a high proportion of premix and needs to be diluted twice: first mixed with bran, then with the main ingredients, ensuring each pellet receives adequate nutrition.

 

When mixing pet food, taste is paramount. Flavoring ingredients like chicken meal and beef meal should be added last. Mix them with a small amount of oil, spray them onto the dry food, and stir for only 2 minutes. Avoid prolonged stirring to prevent ruining the flavor. Regardless of the feed you use, always perform a "uniformity test" after mixing: take three handfuls of food and place them on white paper. Compare the color and particle size. If they match, the mixture is acceptable; otherwise, stir for another 2 minutes.

 

 

 

 

 

Qualifications and Honors

 

 

Customer visit

 

 

1. What is the price of the dry type fish feed extruder?

The price ranges from approximately $3,500-$25,000

2. Do you provide maintenance services for your customers?
Yes, we offer comprehensive after-sales maintenance services to our customers.

 

Contact now