High Efficiency Pellet Feed Machine

The feed extruder is easy to operate and easy to use.

Send Inquiry

Description

Products Description

The application of extruders in the feed industry is becoming more and more extensive. However, with the popularization of its use, some problems have gradually emerged. Among them, the lack of attention paid by the unit to the maintenance of the equipment and the differences in the quality of the operators have caused many safety hazards in the use of the equipment. In order to help everyone better understand and prevent these safety hazards, this article will deeply explore a series of safety issues in the use of extruders and propose corresponding preventive measures for these problems.

Product Parameters

Model	Power	Feeder
DGP40	4KW	0.4KW
DGP50	11KW	0.4KW
DGP60	15KW	0.4KW
DGP70	18.5KW	0.4KW
DGP80	22KW	0.4KW

The clamp is an important component of the extruder. Its use method and installation quality directly affect the safe operation of the equipment. The clamp must be used in pairs, and when installing, it is necessary to ensure that the joint of the two clamps is level with the center line of the extrusion chamber, and the gap is uniform after tightening to avoid tilting or vertical installation. In addition, it is necessary to regularly check the tightening of the clamp bolts to prevent the bolts from loosening due to thermal expansion and contraction.

The cutter is an indispensable configuration of the extruder model. The rationality of its installation and use directly affects the service life of the blade and the stability of the cutter. Therefore, in daily use, it must be installed and used in strict accordance with the operating procedures to avoid problems such as blade breakage and cutter vibration.